Custom Power Tool (CPT)

Custom Power Tool (CPT)

CPT is comprised of 2 parts:
  1. A program to create ticket layouts via a layout manager (Windows only)
  2. Libraries and sample code to integrate the printing functions (Windows, Linux, iOS, Android)
How it works:
  1. Using the CPT Layout Manager, you can create a new ticket by clicking on "File | New".
  2. A new folder based on the name of your project, will be created in your "Documents" folder.
  3. All files in this folder will create the ticket 'project'.
  4. The CPT libraries can then be embedded in an application to load the ticket project and populate it with data.

The packages can be downloaded here
  • CPT_Android_XXX.zip (Android Library and Demo)
  • CPT_iOS_XXX.zip (iOS Library and Demo)
  • CPT_Linux_XXX.tgz (Linux Library and Demo)
  • CPT_WindowsGUI_XXX.zip (Windows Ticket Designer)
  • CPT_WindowsLIB_XXX.zip (Windows Library and Designer)

CPT - Windows
In folder "CPT - Windows\Custom Power Tools - Layout manager"
Run "setup.exe"
This will install the CPT Layout Manager

In folder "CPT - Windows\Custom Power Tools - Libraries and examples"
Run "setup.exe"
This will install SW components (DLL) and sample codes useful for integrating CPT into an existing application

In order to run a demo, you can use the "Print" function from the layout manager.

CPT - Android
Save file "DemoCPTApi.apk" that's in "CPT - Android\Custom Power Tools - Demo APP" into device storage
Using a file manager, create a folder called "CustomXml" on the root of the SD Card
Copy all ticket projects (the "CustomXmlPrint" folders) inside the "CustomXml" folder
Using a file manager run the "DemoCPTApi.apk" to install the demo APP
Run the demo APP. This app will let you load the ticket project saved in "CustomXml" folder

In folder "CPT - Android\Custom Power Tools - Libraries and examples" there's the library file and sample code for programmers.

Please forward any questions or issues to support

Supported printers are listed below:

Printer
FW Revision
KubeII-SPI 2.13+
K3 1.25+
Q3X 1.00+
KPM180H 1.17+
TPTCM60III 1.25+
TPTCM112III 1.25+
VKP80II-SX 4.23+
VKP80III 4.47+
VKP80 ETH 2.10+
VK80 2.10+
MY3  1.62+
MY3 A 1.59+
TG2460 3.48+
TG2480 3.57+
TL60 3.51+
TL80 3.61+
TG1260H 3.48+
TG02H 1.25+
PLUS2 1.48+
mPLUS2 1.48+
PLUS4 2.14+
TORNADO 1.00+
KPM302H 3.10+
KPM302H VP
2.39+
KPM150H 1.27+
KUBEII SCAN 1.56+
KUBEII SCAN 120 1.56+
PP54 1.00+
VKP80III Eth
1.00+
KPM216III
1.00+

    • Related Articles

    • Downloads

      PrinterSet Utility to update logos, edit fonts, change settings, and update printer's firmware UpgCePrn  Utility to update firmware in printer's flash memory UpgCeAero Utility to update firmware in AERO printer's flash memory LogoMake Utility to ...

    • Facility Tool

      Facility tool is automatically installed when "Full Driver" is selected during the driver installation. A tab will be added to the "Printer Properties" window from the "Devices and Printers" Control panel page. It is important to note that User ...

    • Facility Tool Troubleshooting Guide

      If you see the message "Please print a test page in PROPERTIES -> GENERAL -> PRINT TEST PAGE before run this application": Reboot the PC Print a Windows test page to the printer Try to access Facility Tool again If the message persists and you are on ...

    • Driver Manager (Driver Removal Tool)

      Remove Installed Print Driver 1.  Install and run DriverManger 2. Unplug any connected printers 3. Click on "Delete Device" 4. Select the printer you wish to uninstall from the drop-down menu 5. Click "Proceed" 6. Click "Yes" on the Do you want to ...

    • Change Settings with PrinterSet

      To use the tool: Install and Run PrinterSet Click [LOAD] -> [From Device] Select the method of communication for the printer Click [OK] Modify the parameters you wish to change Click [Save] -> [To Device] Check the "Device Setup" checkbox Click [OK] ...