Update AERO Firmware

Update AERO Firmware

Contact support for the latest version of firmware.

Instructions to upgrade firmware:
  1. Install and run UpgCeAero
  2. Put the printer into SERVICE mode
    • For KPM302 Hold LF and S1 button while powering on
    • For KPM180H Hold FF button while powering on
    • For KPM150H Hold FF button while powering on
    • For TPTCM112III Hold FF button while powering on
  1. Click [Select (*.psw)]
  2. Browse to the firmware file ending in .PSW that you have downloaded
  3. Click [Begin Upgrade]
  4. Select USB or the COM port the printer is attached to
  5. If you are using USB you may need to install the driver for the printer
  6. Follow the prompts to complete the upgrade