Upgrade process for firmware, flashdisk, or font module:
Note: If updating multiple modules, the order should be; firmware, flashdisk, then font module.
- Install and run CePrinterSet
- Click "LOAD" - "From Device"
- Select the communication method for the printer and click "OK"
- Printer will read the current configuration and display Setup/Info
- Click the "UPGRADE" section on the left
- Click "Open" and select the .MOD, .PSW, or .PFW file that you are using to perform the upgrade
- Click "Start Upgrade"
- Wait for the upgrade to complete
If you receive an error while trying to update the firmware, please see if your printer is supported.
If it is not, please use UpgCePrn.