CePrinterSet - Supported Printers
Printer
|
| FW Release
Supporting
Settings
| FW Release
Supporting
Upgrade
|
|
|
| KubeII-SPI |
| 1.00+ | 2.16
|
|
|
| K3 |
| 1.00+ | 1.32
|
|
|
| Q3X |
| 1.00+ | 2.22
|
|
|
| KPM180H |
| 1.13+ | 1.33
|
|
|
| TPTCM60III |
| 1.00+ | 1.26
|
|
|
| TPTCM112III |
| 1.00+ | 1.26
|
|
|
| VKP80II-SX |
| 1.00+ | 4.30
|
|
|
| VKP80III |
| 3.00+ | 4.57
|
|
|
| TG02H |
| 1.08+ | 1.20
|
|
|
| PLUS2 |
| 1.48+ | 1.48
|
|
|
| mPLUS2 |
| 1.48+ | 1.48
|
|
|
| PLUS4 |
| 1.00+ | 2.14
|
|
|
| TORNADO |
| 1.00+ | 1.00
|
|
|
| PP54 |
| 1.00+ | Not available
|
|
|
VKP80III Eth
|
| 1.00+
| 1.00
|
|
|
KPM216III
|
| 1.00+
| 1.00
|
|
|
Related Articles
Update Printer with CePrinterSet
Upgrade process for firmware, flashdisk, or font module: Note: If updating multiple modules, the order should be; firmware, flashdisk, then font module. Install and run CePrinterSet Click "LOAD" - "From Device" Select the communication method for ...
Use CePrinterSet From the Command Line
It is possible to send a configuration file to a Custom printer using CePrinterSet in the command line, if your printer is supported. The format is as follows /PRGC /O /F "path_file_psc" /PUSB /S "printer_port_identifier" "/PRGC" this enable printer ...
iOS SDK
Ethernet, Bluetooth and Serial printers are supported on the iOS platform through our iOS SDK Serial printers can be used via Bluetooth and the BT1 Module The SDK can be found in the drivers section of supported printers product pages on ...
Downloads
PrinterSet Utility to update logos, edit fonts, change settings, and update printer's firmware UpgCePrn Utility to update firmware in printer's flash memory UpgCeAero Utility to update firmware in AERO printer's flash memory LogoMake Utility to ...
Change Settings with PrinterSet
To use the tool: Install and Run PrinterSet Click [LOAD] -> [From Device] Select the method of communication for the printer Click [OK] Modify the parameters you wish to change Click [Save] -> [To Device] Check the "Device Setup" checkbox Click [OK] ...